ADM 10

ADM SERIES- ADM 10

Product Description

The ADM10 has been specially designed as a main monitor for the mid field.In particular, the ADM10 can be utilized as the sole reference monitor in a professional recording, broadcast or mastering studio. Irrespective of whether it is a stand-alone unit or in an integrated setup, its digital equalizer guarantees optimum control in the listening area. The user has 5 EQ’s for a quick manual adaptation, as well as the possibility to calibrate the FIR filters for the listening area. This can be done either on the loudspeaker itself or cableconnected Digital Remote Control (DRC+) in addition to a software solution on a PC or Laptop.

THE ACOUSTICAL ADVANTAGES OF THE ADM10:

Digitally equalized, linear phase, 3-way reproduction
All chassis are on one level (time alignment)
Mid-range via a dome mid-range chassis with CAD designed wave guide
1-inch ring radiator with a CAD designed wave guide
Homogenous radiation characteristics well into the lower mid-ranges
Extremely neutral in amount as well as phase frequency characteristics 25Hz to 24kHz (± 3 dB)
Bass reflex with CAD flow-optimized design to avoid movement noise at high volume
Utilization of Neodymium magnets in the chassis for a concentrated magnetic field and imperceptible
magnetic radiation
High end materials such as cherry wood front and Corian™ baffle in the mid and high ranges
ensure low resonance reproduction
Expandable with choice of parameters and volume control for the entire X.1-setup
Analogue or digital control (27 Bit-ADC)

TECHNICAL SPECIFICATIONS

AD converter 27 bit sigma delta, 64x oversampling
DA converter 27 bit sigma delta, 64x oversampling
digital floating point
processor
32 bit floating point, 1500dB dynamic range
digital IN, OUT AES3 format, 32 – 96(110)KHz, 192 KHz prepared
analog IN, OUT XLRsymmetric, subwoofer output-connector
process FIRTEC™ equalization, FIR crossover, limiter, 2 FIRpresets, delay, phase
revers, subwoofer, 3 parametric EQs, high-, lowshelving, all parameters
room equalization remotable
frequency range 25 – 24000 Hz (+/- 3dB)
chassis 5 peakfilter and FIRTEC(TM) system-equalisation
amplifier 1 ” radiator, 3“ dome driver, 2 pcs. of 8”
crossover carboncone 400W(PWM) / 200W / 150W
MOSFET technology 400Hz, 2000Hz
SPL 122dB peak
dimensions: 62,0 X 45,0 X 40,0 cm, 28,0 kg

Reviews

There are no reviews yet, would you like to submit yours?

Be the first to review “ADM SERIES- ADM 10”